Skip to content
Call Now
Unibody Repair at 323 Auto Collision, Los Angeles, CA

Unibody Repair in Los Angeles, CA

Unibody repair measures a vehicle's body structure after a crash and pulls it back to its factory dimensions, since in most modern cars the body is the frame. 323 Auto Collision does this structural work for drivers across Los Angeles at our I-CAR Gold Class shop on Manchester Avenue in South Los Angeles.

Call (323) 308-0554

What Is Unibody Repair?

Unibody repair is the work that returns a vehicle's body structure to its factory shape after a crash. In a unibody vehicle, there is no separate frame underneath. The floor, rails, pillars and roof are welded together into one shell, and that shell carries the engine, the suspension and the people inside.

When a crash moves that shell, the repair starts with measuring it against the factory dimensions. Damaged sections are pulled back into place with clamps and fixtures, and sections too damaged to pull are replaced. Only then do the panels and paint go on.

Why Unibody Repair Matters in Los Angeles, CA

Serious crashes happen on the roads around our shop. The Harbor Freeway and the Century Freeway meet just southwest of us, and long streets like Manchester Avenue carry fast cross traffic through busy intersections. Those are the crashes that move a structure, not just a panel.

The unibody is what keeps the cabin's shape in a crash. A structure left out of place protects you less the next time, and it throws off everything bolted to it. Doors stop sealing, panels stop fitting, and the vehicle no longer drives straight.

When to Consider Unibody Repair in Los Angeles, CA

Have the structure measured after any crash that bent a wheel, pushed in a corner, or set off the airbags. Those are strong signs the force reached the body. A visual check alone is not enough.

Watch for changes after a crash that was repaired elsewhere too. Doors that start sticking, gaps that are wider on one side, or a car that pulls even after an alignment all point back to the structure. Measuring tells you for sure.

Signs You Need Unibody Repair

These signs point to damage in the structure:

My doors don't line up or close right anymore

A door that sticks or sits uneven often means the body shifted.

The hood or trunk gap is wider on one side

Uneven gaps show the structure moved in the crash.

The car drives crooked even after an alignment

An alignment cannot fix suspension mounts that have moved.

I see wrinkles in the metal under the car

Buckled rails or floor panels mean structural damage.

How Our Unibody Repair Works

Here is how structural repair goes at our shop:

  • Step 1: Call (323) 308-0554 or request an estimate online and tell us how the crash happened.
  • Step 2: Bring the vehicle to our Los Angeles shop, where our estimator walks around it with you and we inspect the structure.
  • Step 3: We explain what moved, how we will correct it, and what the repair will take before any work starts.
  • Step 4: Once you approve, we repair the structure and panels, refinish the vehicle, and walk the finished work with you.

Measuring the Structure

Every vehicle has factory points that set where the doors, suspension and engine mount. Measuring those points shows where the body moved and how far. It turns a guess into a plan.

We measure before the repair, during it, and after it. That way each pull is checked against the number it should reach. The structure is right before any new panel goes on.

Pulling and Straightening

Moved sections are pulled back into place with the body held firmly in fixtures. The force goes in the opposite direction of the crash, a little at a time. Each pull is measured as it goes.

Some sections cannot be pulled back safely, because the metal has kinked or torn. Those sections are replaced at the factory seams. The aim is a structure as strong as the one the vehicle was built with.

Sectioning and Panel Replacement

When a rail, pillar or panel is too damaged, it is replaced instead of repaired. New sections are joined where the repair methods for that vehicle allow. That keeps the strength where the design needs it.

Once the structure is right, the outer panels go back on and are refinished. If the crash also bent suspension parts, our Suspension and Steering Repair service handles them. Our Collision Repair service covers the rest of the vehicle.

Why Los Angeles Customers Choose 323 Auto Collision

323 Auto Collision has repaired collision damage on Manchester Avenue since 2014, with a team that brings over 30 years of experience. We are I-CAR Gold Class, I-CAR's highest training recognition for a collision shop, and that training covers the structures of modern vehicles. Every repair carries our lifetime warranty.

We are a direct repair facility that works with insurers on your claim, and Snap Finance is available when you pay out of pocket. Our estimator walks the vehicle with you before and after the repair, and most repairs are back with their owners in 7 to 10 days. Hablamos español.

Get an Estimate

Tell us what happened to your vehicle. We'll look it over and give you a clear estimate before any work starts.

Call (323) 308-0554

DRIVEN BY TRUST, HEAR FROM LOS ANGELES DRIVERS

Trusted by Drivers in Los Angeles, CA

Frequently Asked Questions

Frequently Asked Questions about Unibody Repair

Answers to the questions drivers ask most about this repair at 323 Auto Collision in Los Angeles, CA.

How much does unibody repair cost?

The price depends on where the structure was hit, how far it moved, and which sections can be pulled back and which need replacing. Parts and refinishing add to the total. We give you a written estimate after we inspect and measure the vehicle.

What is the difference between unibody and frame repair?

Older trucks and some SUVs sit on a separate frame. Most cars and many SUVs today have a unibody, where the body itself is the structure. We repair both, measuring each against its factory dimensions.

Is a car with unibody damage a total loss?

Not always. Many vehicles with structural damage can be repaired safely. Your insurer decides on a total loss, and as a direct repair facility we work with insurers on your claim.

Is unibody repair covered by your warranty?

Yes. Every repair we make carries a lifetime warranty. Our estimator walks the finished vehicle with you and explains what it covers.

What areas do you serve for unibody repair?

Our shop is at 355 E Manchester Ave in Los Angeles, 90003. Drivers come to us from Huntington Park, Inglewood, Compton, South Gate, Lynwood, Vernon, Westmont, Windsor Hills, Gardena and across South Los Angeles.

Can I drive my car if the unibody is damaged?

It is safest not to until it has been checked. A damaged structure protects you less in another crash and can affect how the car handles. Call (323) 308-0554 and we will help you plan how to get it to us.

Unibody Repair Near Los Angeles, CA

When your vehicle needs unibody repair in Los Angeles, 323 Auto Collision measures the structure and brings it back to its factory shape before any panel goes on. Call (323) 308-0554 to set up your estimate, or request one online.

Our shop sits at 355 E Manchester Ave in Los Angeles, on Manchester Avenue just east of the Harbor Freeway (I-110), an easy drive from South Los Angeles, Inglewood, Compton and South Gate.

355 E Manchester Ave

Los Angeles, CA 90003

(323) 308-0554

Mon - Fri: 8:00am - 5:00pm

Sat: 8:00am - 12:00pm

Sun: Closed

Get directions